Tap Replacement in Kedron
A tap replacement in Kedron usually starts with a style choice: one lever or two spouts. Homes across Kedron range from interwar weatherboards to recent unit blocks, and every job is done by a licensed plumber. We help you pick a fitting that suits the fixture, then fit it properly.
If we're late, $100 comes off your bill
- Licensed and InsuredEvery job done by a licensed plumber. QBCC No: 15024607
- Fixed Quote FirstFlat-rate pricing, agreed before any work starts
- Lifetime Labour WarrantyBacked by our Fix-It-or-It's-Free guarantee (T&Cs apply)
- $0 Call-Out FeesNo extra charge for nights, weekends or public holidays
Dripping taps, washers and cartridges have their own coverage on tap repairs. Here the focus is choosing and fitting the new fitting.
Mixer Taps and Separate Taps Compared
A mixer blends hot and cold at a single spout and runs on one lever or two handles. Separate taps keep the two supplies apart and give each its own outlet. Whichever you choose, the new fitting needs to line up with three things already on the fixture:
Holes
the count and spacing of the holes through the bench or basin. A one-hole mixer has nowhere to sit where two taps once ran.
Mounting
deck-mounted fittings drop through the bench. A wall model draws its supply from pipes inside the wall, so moving between the two alters the wall or the basin, not just the fitting.
Connections
the supplies underneath and any isolation valve on each line, which closes one outlet alone and leaves the rest of the house running.
We check the old fitting and everything under it before recommending a replacement, since the choice has to suit what's already there.
Do You Need a Licensed Plumber to Fit a Tap
Yes, because Queensland treats tap replacement as licensed work. The QBCC's guide for householders names one tap task as unregulated: replacing the washer or jumper valve inside, which anyone with the right skill may do while still meeting the standards.
From there, the paperwork follows the job's size:
Swapping a fitting for a similar one
is minor plumbing work. A QBCC licence covers it, and no permit or Form 4 comes into it.
Notifiable work
covers a tap that's new to the building or shifted to a new spot: council approval isn't required, and the plumber has 10 business days to file the Form 4.
Shared-drain buildings
are the exception. Where a building shares its drain with another property or runs on dual water supplies, adding a fixture becomes permit work and the plumber applies first.
Renters have one step before any of that. Written approval from the property owner or manager, recorded on a Form 23, is required before a tenant attaches a fixture, and a reasonable request should get a fair hearing.
Where a tenant fitted something without consent, the owner or manager holds three options. The change can be handled as a tenancy breach and worked through dispute resolution, kept as an upgrade, or stripped out with the costs charged back to the tenant.
WaterMark and WELS on a New Tap
WaterMark certification is proof that a plumbing product has passed testing against the safety and fitness-for-purpose requirements set by Australia's plumbing code. WELS is short for Water Efficiency Labelling and Standards, the national scheme registering a tap's star rating and water use.
A licensed plumber can only lawfully install a tap carrying both marks. Business Queensland sets a 3-star floor for new tapware and showerheads, and exempts renovations from the rule.
Shopping online brings its own checks. The ad has to display the WaterMark logo, the product specification and licence number, and the WELS registration details with the stars and usage figures. Either product database can be checked against the model name before you pay, and a seller should fill any gaps on request.
For the wider jobs around basins and cisterns, see the tap and toilet plumbing guide.
What Changes the Price of a Tap Replacement
Five things move the price, and the fixed quote locks the figure once we've seen the job.
Tap style
a wall-mounted model or a two-spout pair takes longer than a single-lever mixer.
Stop valves and connectors
parts in good order keep the job short, while seized or missing ones add work.
Hole fit
a new fitting whose footprint fights the existing holes means drilling or a new basin.
Access
a cramped cupboard under a basin eats more time than an open laundry tub.
Paperwork
notifiable work carries a Form 4 lodgement fee, paid by the contractor and often passed to the owner with admin costs.
Which Rental Taps Must Meet the Limit
The number is 9 litres per minute. Before charging a renter for the full water account, the owner needs the cold taps indoors, single mixers included, flowing no faster than that.
Which outlets the test covers:
Counted
cold outlets above the basin, the kitchen sink and the laundry tub, mixers included.
Exempt
bath taps, garden taps outside, and the feeds to washing machines and dishwashers.
Proof counts as much as flow. The Residential Tenancy Authority suggests owners hold on to plumbing reports or compliance certificates, receipts, packaging, and warranty papers and instruction booklets for the tapware. Fixtures made from 2005 on should show 3 stars or better.
Rental weight here is real: census figures put outright ownership at 18.8 per cent, with another 35.7 per cent mortgaged, so a large share of the suburb answers to a property manager. One visit can also sort a leaking pan, which sits on our toilet repairs page.
How We Replace Your Tap
- 1
Get in touch
Call (07) 3523 6484 or send a quick message about the job in Kedron, and we'll ask what we need to know.
- 2
We match the fitting to the fixture
On site we measure the hole spacing, check whether the fitting sits on the deck or the wall, and confirm the new tap carries WaterMark and WELS. Anything that clashes gets raised before work begins.
- 3
Sign off the quote
You'll see a fixed quote before any work starts, with flat-rate pricing and no hidden fees. The job starts when you're happy with it.
- 4
Pay once it's done
Pay by card or EFTPOS on site after the work's finished, or choose Fix now, pay later.
Plumbing job in Kedron?
$0 call-out fees, available 24/7, and same-day where we can.
Tap Replacement Questions From Kedron
Call (07) 3523 6484Can I replace a tap myself in Kedron?
No, fitting a new tap is licensed work here. The QBCC exempts only the washer or jumper valve swap, calling it unregulated, and even that small job has to reach the standards. Anything beyond it needs a licensed plumber.
What do WaterMark and WELS mean on a tap?
WaterMark is product certification showing a tap meets the requirements of Australia's plumbing code. WELS is short for Water Efficiency Labelling and Standards, the scheme recording a tap's star rating and water use. Both marks are needed for a lawful install.
Can I buy my own tap and have a plumber fit it?
Yes, provided the product carries the WaterMark logo and a WELS rating. Certification is what lets a licensed plumber install a tap legally anywhere in Australia. Check both marks before you pay.
How much does it cost to replace a tap in Kedron?
The two biggest drivers are the style of tap you choose and whether the stop valves and connectors beneath it are reusable. A fixed written quote then locks the price before any tools come out.
Does a tap replacement in Kedron need a permit or Form 4?
Swapping like for like is minor plumbing work, so no permit or Form 4 applies. Installing a tap that is new or moved is notifiable work: no council permit, but a Form 4 goes to the QBCC. Shared-drain buildings can need a permit.
Call Us About the New TapWe'll call you back.
Call (07) 3523 6484 to book a plumber in Kedron. We're available 24/7, with $0 call-out fees, flat-rate pricing and same-day where we can.
To claim your $0 call-out fee, call (07) 3523 6484 today.