Hot Water Plumber in Kedron

200+ five-star Google reviews

Hot water going cold is one of the most common reasons a household here calls a plumber, and the fix starts with a short set of checks, not a new unit. As your hot water plumber in Kedron, we say straight out whether the job needs a fix or a full replacement, then put the price in writing before we pick up a tool.

If we're late, $100 comes off your bill

Kedron Same Day Plumbing team with the ute
Same Day Service
  • Licensed and InsuredEvery job done by a licensed plumber. QBCC No: 15024607
  • Fixed Quote FirstFlat-rate pricing, agreed before any work starts
  • Lifetime Labour WarrantyBacked by our Fix-It-or-It's-Free guarantee (T&Cs apply)
  • $0 Call-Out FeesNo extra charge for nights, weekends or public holidays
Kedron Same Day Plumbing team and ute

We're licensed plumbers, available 24/7, and there's no extra charge for nights, weekends or public holidays. Our Kedron plumbing page covers everything else we do, and the bathroom plumbing page handles the fixtures the hot water feeds.

Checks a Plumber Runs on a Hot Water System

  1. 1

    The Cold Supply and the Isolation Valve

    The isolation valve on the cold line feeding the unit gets checked first. Cold water has to be reaching the system at all before anything else tells you anything.

  2. 2

    Leaks at the Tank, Fittings and Valves

    We look for water at the tank body, the pipe joints, each valve and the relief valve line. Where the water shows up decides what the fix will be.

  3. 3

    One Tap or Every Tap

    Hot water missing at a single fixture points to that fixture or its mixer. Missing everywhere points back to the system, its supply or its valves.

  4. 4

    The Gas or Power Supply

    A gas unit gets its supply confirmed, and a gasfitter handles anything on that side. On the electrical side, our checks stop at the water, the valves and the supply; we don't touch wiring or breakers.

  5. 5

    The Temperature at the Tap

    Finally, we measure how hot the water runs at a hot tap. Water that's scalding, lukewarm or swinging between the two tells us whether the tempering side is doing its job.

Plumbing job in Kedron?

$0 call-out fees, available 24/7, and same-day where we can.

Temperature Control Devices and When They Are Needed

A temperature control device keeps water at household taps at or below 50°C. The water in storage is held at 60°C or hotter, hot enough that Legionella and similar bacteria cannot grow.

Queensland requires one fitted on every new or replacement hot water system, and swapping the unit for the same again still counts as a replacement. Two more triggers matter:

  • a water heater being installed or replaced, whatever the reason
  • putting in a brand-new shower or bath where none stood before

A washer swap or a new shower head alone does not bring the rule with it.

When a Fault Is Worth Fixing

Water leaking through the body of a storage tank means that tank is done, and the system gets replaced. A leak at a valve, a fitting or the relief outlet is a repair instead.

Age and service history steer the call. QBCC advice puts the interval at five years between services by a licensed person, sooner where the supply comes from a bore or a rainwater tank, and that interval is advice, not a rule. Repeat faults on an ageing system usually tip the decision toward replacing it.

What a Replacement Involves Under Queensland Rules

A licensed plumber replaces a hot water system, and a gas unit also needs a licensed gasfitter on that side of the job. For an existing home, the job is notifiable work: no council permit and no mandatory inspection, but a Form 4 reaches the QBCC inside 10 business days, and you keep a copy. Our gas fitting page sets out the gas side in full.

Hot Water Across Old and New Housing

A century of housing means water heaters of every vintage sit side by side here, from tanks in the undercrofts of raised weatherboards to bulk-fitted cylinders in the newer blocks near Eleventh Avenue. An old tank on the way out usually announces itself with a damp laundry floor, or a shower that goes cold on the first chilly June morning.

Area-level approvals added 53 dwellings in 2021-22, so plenty of systems here are young while their neighbours are not. Whatever age your unit is, a cold shower before school and work is urgent for most households, and the emergency plumber page covers what can't wait.

How a Hot Water Job Runs

  1. 1

    Get in touch

    Call (07) 3523 6484 or send a quick message about the job in Kedron, and we'll ask what we need to know.

  2. 2

    We test the system on site

    We run the checks above, then say whether the unit can be mended or needs replacing, and what each path involves.

  3. 3

    Sign off the quote

    You'll see a fixed quote before any work starts, with flat-rate pricing and no hidden fees. The job starts when you're happy with it.

  4. 4

    Pay once it's done

    Pay by card or EFTPOS on site after the work's finished, or choose Fix now, pay later.

Hot Water Questions Answered

Call (07) 3523 6484

Do you fix hot water systems in Kedron?

Yes, a licensed plumber repairs and replaces hot water systems and tempering valves, which are regulated plumbing work. A gas unit also needs a licensed gasfitter for the gas side, and we handle both.

Does a new hot water system need a tempering valve?

Yes, every new or replacement system needs a temperature control device fitted, and a like-for-like swap counts as a replacement. Swapping a washer or a shower head does not trigger one, but installing a brand-new shower or bath does.

How often should a hot water system be serviced?

The QBCC suggests a service every five years by a licensed person, and more often where the supply is bore water or tank water. That interval is guidance, not a legal requirement.

Do I need a permit to replace a hot water system?

No, no council permit or mandatory inspection applies to a replacement in an existing home. The job is notifiable work, so the licensed plumber lodges a Form 4 with the QBCC within 10 business days and gives you a copy.

What decides the cost of hot water repairs in Kedron?

The two biggest drivers are which part has failed and whether the gas side or a tempering valve is involved. The fixed quote before work starts sets the final price, with flat-rate pricing and no hidden fees.

Call Us About Your Hot WaterWe'll call you back.

Call (07) 3523 6484 to book a plumber in Kedron. We're available 24/7, with $0 call-out fees, flat-rate pricing and same-day where we can.

To claim your $0 call-out fee, call (07) 3523 6484 today.

Call (07) 3523 6484

Your details are kept private and used only to respond to your enquiry.

Call (07) 3523 6484Get a quote