Tap Repairs in Kedron
A dripping tap has one of two possible insides, and that settles the whole repair. Tap repairs in Kedron begin with a single question on the phone: washer tap or mixer? The answer picks the part, draws the legal line on who may do the work, and shapes the price.
If we're late, $100 comes off your bill
- Licensed and InsuredEvery job done by a licensed plumber. QBCC No: 15024607
- Fixed Quote FirstFlat-rate pricing, agreed before any work starts
- Lifetime Labour WarrantyBacked by our Fix-It-or-It's-Free guarantee (T&Cs apply)
- $0 Call-Out FeesNo extra charge for nights, weekends or public holidays
Either way, a licensed plumber from our team handles the fix. One tap is rarely the whole story either: the tap and toilet plumbing page maps the wider jobs, and the Kedron home page lists every service we run across the suburb.
How Tap Type Decides the Repair
Washer taps and mixers seal differently: the first shuts off by squeezing a soft rubber washer onto a brass seat, the second by turning a ceramic disc cartridge. Knowing which sort sits on your bench tells you what has worn and what the visit involves.
Washer taps
Two handles, several full turns each, one for hot and one for cold. Winding a handle down drives the spindle, and the jumper valve at its end lands the washer on the seat to block the flow.
Mixer taps
One lever blends hot and cold, and a quarter turn usually does the whole job. Inside, a cartridge with two polished ceramic discs controls the flow.
Wear lands in different places too. Washer taps shred their rubber or groove the seat; mixers collect grit between the discs until they drip or jam. A worn cartridge means fitting the exact matching model, because measurements and threads vary from make to make.
A handle that fights back usually means grit in the cartridge or a tired spindle, even while the tap still seals.
Tap Repairs for Owners and Tenants
Queensland leaves one tap job open to handy owners: the QBCC lets anyone with the appropriate knowledge and level of skill renew a tap's jumper valve or washer. That is the full unregulated list, and the finished job still has to comply with the plumbing standards.
Every other repair on a tap fitting counts as minor work, so a QBCC licensee does it with neither a permit nor a Form 4. Putting in a whole new tap sits a step further along: the QBCC guide holds that job up as its picture of work beyond the owner's short list.
Renters take a different route. Anything the tenancy Act leaves off its emergency schedule is routine, so the tenant tells the owner or agent and the fix follows within a reasonable time. Serving a Form 11 notice to remedy breach starts a formal seven-day clock if the request stalls.
Running toilets follow their own rules, and they sit on our toilet repairs page.
Still Dripping After You Turn It Off
Water still creeping out of the spout after the handle sits fully closed means the parts meant to seal have failed. Where the water shows narrows the part:
Spout, handle closed
the washer, its seat or the cartridge has worn out.
Around the handle while running
the spindle seal or an O-ring under it has perished.
Base of the tap, or damp cabinetry below
base O-rings, a nut worked loose, or a body split by corrosion.
Every one of those repairs starts by stopping the water. Look under the basin or behind the cistern for a small isolation valve; closing the valve keeps the rest of the house supplied. Where no valve exists, the tap at the water meter turns clockwise to shut, once you have confirmed nothing downstream, hot water units included, relies on that flow staying open.
When an Old Tap Is Past Repair in Kedron
Four things move a tap repair price: which sort of tap, which part has died, whether the seat or body has worn, and how simply the water shuts off. No figure gets quoted sight unseen. The number arrives in a written fixed quote once we have looked at the fitting, and it stands before any tool comes out.
The suburb's tapware runs across the generations. Area-level counts put resident growth near 6.7 per cent over the five years to 2025, and approvals added 53 dwellings in 2021-22.
Fresh unit blocks arrive with new mixers, while interwar weatherboards still run taps fitted decades back. The two eras fail differently, and the visit adjusts to whichever generation sits on the bench.
Three signs say the fixing should stop: a body cracked or corroded right through, a seat past re-cutting, and a leak that outlives new washers and a fresh cartridge. Any of them points to a replacement tap, and picking one lives on our tap replacement page.
How a Tap Repair Visit Runs
- 1
Get in touch
Call (07) 3523 6484 or send a quick message about the job in Kedron, and we'll ask what we need to know.
- 2
We diagnose the tap on site
We stop the supply, strip the tap at the basin or bath, and find the failed part: washer, jumper valve, O-ring or cartridge. You see the worn piece before anything gets ordered.
- 3
Sign off the quote
You'll see a fixed quote before any work starts, with flat-rate pricing and no hidden fees. The job starts when you're happy with it.
- 4
Pay once it's done
Pay by card or EFTPOS on site after the work's finished, or choose Fix now, pay later.
Plumbing job in Kedron?
$0 call-out fees, available 24/7, and same-day where we can.
Tap and Mixer Questions Answered
Call (07) 3523 6484How do I stop my tap from dripping?
Find the sealing part first: the rubber washer and its seat on a washer tap, the cartridge on a mixer. QBCC rules let a capable person swap the washer or its jumper valve, and every other repair goes to a licensed plumber. Urban Utilities also excludes dripping taps from its concealed leak adjustment, so fixing it stays with the owner.
What makes a mixer tap leak from the base?
Usually worn base O-rings, a fitting under the sink that has worked loose, or a body cracked by corrosion. The water needs shutting off at the isolation valve before any of those repairs starts.
How much does it cost to fix a leaking tap in Kedron?
The price is set by a fixed quote once we have seen the tap on site. What drives the figure: the tap type, the part required, damage to the valve seat or tap body, how easily the water can be isolated, and how many taps you want done.
Is it worth repairing an old tap?
Yes, while the body stays sound and the wear sits in the washer, O-ring or cartridge. A body cracked or eaten by corrosion, a badly damaged seat, or a leak that persists after new parts all point to replacement instead.
Will turning the tap off harder stop the drip?
No, and forcing the handle down makes things worse. Extra pressure grinds the washer into its seat and speeds up wear on both. Replacing the tired part is what actually stops the drip.
Call Us and Shut That Drip OffWe'll call you back.
Call (07) 3523 6484 to book a plumber in Kedron. We're available 24/7, with $0 call-out fees, flat-rate pricing and same-day where we can.
To claim your $0 call-out fee, call (07) 3523 6484 today.